Asus VK191 Series - Chapter 3: General Instruction

3-2 Chapter 3: General Instruction
3. Color
Select the image color you like from this
function.
•
Color Temp.
: contains five color
modes including Cool, Normal, Warm,
sRGB, and User mode.
•
Skin Tone
: contains three color
modes including Reddish, Natural, and
Yellowish.
In the User mode, colors of R (Red), G (Green), and B (Bluee) are user-
configurable; the adjusting range is from 0-100.
2. Image
You can adjust brightness, contrast,
sharpness, saturation, position (VGA only),
ASCR, and focus (VGA only) from this main
function.
•
Brightness
: the adjusting range is from
0 to 100. is a hotkey to activate this
function.
•
Contrast
: the adjusting range is from 0 to 100. is a hotkey to activate
this function (For those models without speakers).
•
ASCR
: turns on/off the ASCR(ASUS Smart Contrast Ratio) function.
•
Sharpness
: the adjusting range is from 0 to 100.
•
Saturation
: the adjusting range is from 0 to 100.
•
Position
: adjusts the horizontal postition (H-Position) and the vertical
position (V-Position) of the image. The adjusting range is from 0 to 100.
•
Focus
: reduces Horizonal-line noise and Vertical-line noise of the image
by adjusting (Phase) and (Clock) separately. The adjusting range is from
0 to 100.
• Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
• Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.