Asus VK266 Series - Assembling.the.monitor.base; Connect Cables

1-2 Chapter 1: Product introduction
1.3 Assembling the monitor base
To assemble the monitor base:
1. Connect the base with the monitor. A click indicates that the base has been
connected successfully.
2. Adjust the monitor to the angle that is most comfortable for you.
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
2
1
1.4 Connect cables
To connect cables:
1. Remove back cover by hand carefully.
2. Connect cables which you need base on chapter 1.5.2, Page1-4.