Asus VL278 Series - Connecting Cables; Turning the Monitor On

2-3ASUS VL278 Series LCD Monitor
2.4 Connecting the cables
Connect the cables as the following instructions:
VL278H
VL278HE
 :
a. Connect the power adapter securely to the monitor’s DC input.
b. Connect one end of the power cord to the power adapter and the other
end to a power outlet.
 :
a. Plug one end of the VGA/HDMI cable to the monitor’s VGA/HDMI jack.
b. Connect the other end of the VGA/HDMI cable to your computer's VGA/
HDMI jack.
c. Tighten the two screws to secure the VGA connector.
 connect one end of the audio cable to the
monitor’s Audio-in port, the other end to the computer’s audio-out port.
When these cables are connected, you can choose the desired signal
from the Input Select item in the OSD menu.
2.4 Turning on the monitor
Press the power button . See page 1-2 for the location of the power button. The
power indicator lights up in white to show that the monitor is ON.