Asus VS197 Series - Detaching Arm;Stand for VESA Mount

2-1
Chapter2:Setup
2.1 Detaching the arm/stand
(for VESA wall mount)
ThedetachablestandoftheVS197/VS198SeriesLEDmonitorisspecially
designedforVESAwallmount.
To detach the arm/stand:
1. Pullthestopleverandturnanticlockwisetounlock.
2. Detachthebasefromthemonitor.
3. Useyourngersgentlypullawaytheplatethatcoversthestand
neck.Useascrewdrivertoremovethefourscrewsthatsecurethe
standtothemonitor.
4. Detachthestandfromthemonitor.
• Werecommendthatyoucoverthetablesurfacewithsoftclothto
preventdamagetothemonitor.
• Holdthestandofthemonitorwhileremovingthescrews.
1
2
3
5
4
• TheVESAwallmountkit(75x75mm)ispurchasedseparately.
• UseonlytheULListedWallMountBracketwithminimumweight/
loadaccordingtothemodellistedinthespecificationtable(Screw
size:M4x10mm).
This Manual: http://www.manuallib.com/file/2596108