Asus VS247 Series - Detaching the Arm;Stand; VESA Mount Preparation

2-1
Chapter 2: Setup
2.1 Detaching the arm/stand
(for VESA wall mount)
ThedetachablestandoftheVS228/VS238/VS247SeriesLCDmonitoris
speciallydesignedforVESAwallmount.
To detach the arm/stand:
1. Pullthestopleverandturnanticlockwisetounlock.
2. Detachthebasefromthemonitor.
3. Useyourngersgentlypullawaytheplatethatcoversthestand
neck.Useascrewdrivertoremovethefourscrewsthatsecurethe
standtothemonitor.
4. Detachthestandfromthemonitor.
• Werecommendthatyoucoverthetablesurfacewithsoftclothto
preventdamagetothemonitor.
• Holdthestandofthemonitorwhileremovingthescrews.
1
2
3
5
4
• TheVESAwallmountkit(100x100mm)ispurchasedseparately.
• UseonlytheULListedWallMountBracketwithminimumweight/
loadaccordingtothemodellistedinthespecificationtable(Screw
size:M4x10mm).
Downloaded from www.vandenborre.be