2-1ASUS VU249CFE Series LCD Monitor
2.1 Assembling the monitor arm/base
To assemble the monitor base:
1. Have the front of the monitor face down on a table, get the VESA cover
lifted.
2. Place the arm hinge of the stand assembly onto its compartment on the rear
of the monitor with 4 screws.
3. Attach the base into the arm with screw.
4. Lock the screw, making sure the groove match in line.
5. Assembing the VESA cover.
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
Base screw size: M4 x 12 mm.
To Next Page
Loading...
