2-2 Chapter 2: Setup
2.2 Detaching the arm/base (for VESA
wall mount)
The detachable arm/base of this monitor is specially designed for VESA wall mount.
To detach the arm/base:
1. Have the front of the monitor face down on a table, get the VESA cover
lifted.
2. Use a screwdriver to remove the screw which on the base.
3. Remove the base.
4. Remove the screws on the hinge, then remove the hinge.
5. Assembing the VESA cover.
1
2
4
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
• The VESA wall mount kit (75 x 75 mm) is purchased separately.
• Use only with UL/CSA/GS Listed Wall Mount Bracket with minimum
weight/load bearing capacity of 22.7 kg (50 Ib) (Screw size: M4 x 12 mm).
To Next Page
Loading...
