Asus VU249CFE Series - Connecting the Cables; Turning On the Monitor

2-4 Chapter 2: Setup
2.4 Connecting the cables
Connect the cables as the following instructions:
15W
15W
• To connect the power cord: Connect one end of the power cord
securely to the monitor’s AC input port, the other end to a power outlet.
• To connect the HDMI/USB-C cable:
a. Plug one end of the HDMI/USB-C cable to the monitor’s HDMI/USB-C
jack.
b. Connect the other end of the HDMI/USB-C cable to your device’s HDMI/
USB-C jack.
It is suggested to use USB ceried Type-C cable. If the signal source supports
DP Alt mode, all video and audio can be transmitted.
• To use the earphone: connect the end with plug type to the monitor’s
earphone jack when an HDMI/USB-C signal is fed.
When these cables are connected, you can choose the desired signal
from the
Signal
item in the OSD menu.
If you need to replace the power cord or the connection cable(s),
please contact ASUS customer service.
2.5 Turning on the monitor
Press the power button . See page 1-2 for the location of the power button. The
power indicator lights up in white to show that the monitor is ON.