Asus VU249CFE Series - Image

3-5ASUS VU249CFE Series LCD Monitor
4. Image
Set the image related setting from this menu.
Back/Exit
VU249CFE
Splendid
Standard Mode
Brightness
65
Splendid
Input Select
Enter
Eye Care
Color
1920x1080 100Hz
Signal
USB-C
Volume 50 USB-C 15W
|
ASCR
Sharpness
Trace Free
Aspect Control
Motion Sync
60
Image
Adaptive-Sync
• Sharpness: The adjusting range is from 0 to 100.
• Trace Free: Adjusts the response time of the monitor.
• Aspect Control: Adjusts the aspect ratio to Full, or 4:3.
4:3 is only available when input source is in 4:3 format.
• ASCR: Turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
• Motion Sync: Offers a more clear mode while displaying motion
pictures. Please note this function only works when the refresh rate is
75Hz ~ 100Hz. It includes two modes: Normal Mode and Advanced
Mode, which can provide different effects.
• When this function is enabled, the system will automatically reduce the
brightness level.
• If the Adaptive-Sync is enabled, the Motion Sync function is grayed out.
• To activate this function, you need to do the following: turn off Ambient Effect.
• Adaptive-Sync: It can allow a Adaptive-Sync supported graphics
source to dynamically adjust display refresh rate based on typical content
frame rates for power efcient, virtually stutter free and low-latency
display update.
This function is not available when Motion Sync is enabled.