Asus VW199 Series - 2.1 Detaching the Arm;Stand (for VESA Wall Mount)

2-1 Chapter2:Setup
2.1 Detaching the arm/stand
(for VESA wall mount)
ThedetachablestandoftheVW199SeriesLEDmonitorisspeciallydesignedfor
VESAwallmount.
To detach the arm/stand:
1. Remove the arm cover.
2. Have the front of the monitor face down on a table.
3. Useascrewdrivertoremovethethreescrewsonthestandofthemonitoras
thebelowdrawingshows.
4. Detach the stand from the monitor.
• Werecommendthatyoucoverthetablesurfacewithsoftclothtoprevent
damagetothemonitor.
• Holdthestandofthemonitorwhenyouremovethescrews.
screws
• TheVESAwallmountkit(100x100mm)ispurchasedseparately.