Asus WS C246M PRO - Page 35

ASUS WS C246M PRO
1-23
Chapter 1
11. Auxiliary panel connector (20-2 pin AUX_PANEL1)
ThisconnectorisforadditionalfrontpanelfeaturesincludingfrontpanelSMB,locator
LEDandswitch,chassisintrusion,andLANLEDs.
• FrontpanelSMB(6-1pinFPSMB)
This6-1pinconnectorisforthefrontpanelSMBuscable.
• LANactivityLED(2-pinLAN1_LED,LAN2_LED)
This2-pinconnectorisfortheGigabitLANactivityLEDsonthefrontpanel.
• LocatorLED(2-pinLOCATORLED1,2-pinLOCATORLED2)
This2-pinconnectorisforthelocatorLED1andLED2onthefrontpanel.Connectthe
LocatorLEDcablestothese2-pinconnector.TheLEDswilllightupwhentheLocator
buttonispressed.
• LocatorButton/Switch(2-pinLOCATORBTN)
This2-pinconnectorisforthelocatorbuttononthefrontpanel.Thisbuttonqueriesthe
stateofthesystemlocator.
12. Thermal sensor cable connector (3-pin TR1)
Thisconnectorallowsyoutoconnectathermalsensorcablethatisusedformonitoring
temperature.Connectthethermalsensorcabletotheconnectorandplaceitsprobeto
thedevicethatyouwanttomonitor.