Asus WS X299 SAGE/10G - Page 37

ASUS WS X299 SAGE/10G
1-23
Chapter 1
11. Thermal sensor connector (2-pin T_SENSOR)
Thisconnectorisforthethermistorcablethatmonitorsthetemperatureofthedevices
andthecriticalcomponentsinsidethemotherboard.Connectthethermistorcable
andplacethesensoronthedeviceorthemotherboard’scomponenttodetectits
temperature.
12. Serial port connector (10-1 pin COM1)
Thisconnectorisforaserial(COM)port.Connecttheserialportmodulecabletothis
connector,theninstallthemoduletoaslotopeningatthebackofthesystemchassis.
Thethermalsensorispurchasedseparately.