3-10
Chapter 3: BIOS Setup
Chapter 3
Creating RAID
To create RAID:
1. Press <F11> on your keyboard or click
from the BIOS screen to open
EZ Tuning Wizard screen.
2. Click Yes
to enable RAID.
• Ensure that your HDDs have no existing RAID volumes.
• Ensure to connect your HDDs to Intel
®
SATA connectors.
3. Select the port that you want to set to [RAID] mode, CPU or SATA, then click Next.
4. Select a Main Cooling System BOX cooler, Tower cooler, Water cooler, or I’m not
sure, then click Next.
5. After selecting the Main Cooling System, click Next then click Yes to start the OC
Tuning.
• CPU (VROC mode): Supports Intel
®
Virtual Raid on CPU. This feature requires a KEY
module (purchased separately) and Intel
®
SSD modules.
• SATA (SATA mode): Supports SATA RAID.
To Next Page
Loading...
