EasyManua.ls Logo

Asus X99-A/USB 3.1 - Page 125

Asus X99-A/USB 3.1
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ASUS X99-A/USB 3.1
3-49
Chapter 3
Chassis Fan 1/4 Min. Duty Cycle(%) [60]
Use the <+> or <-> keys to adjust the minimum chassis fan duty cycle. The
values may differ via Qfan tuning.
Allow Fan Stop [Disabled]
This item allows the chassis fans to run at 0% duty cycle when the
temperature of the source drops below the lower temperature.
Conguration options: [Disabled] [Enabled]
EXT Fan 1/3 Q-Fan Control [DC Mode]
These items allow you to set the extension fans’ Q-Fan control feature into DC Mode, PWM
Mode, or disable these extension Q-Fan controls from your motherboard.
Conguration options: [Disabled] [DC Mode] [PWM Mode]
The following items appear only when you set the EXT 1/3 Q-Fan Control to [PWM Mode]
or [DC Mode].
EXT Fan 1/3 Q-Fan Source [CPU]
This item controls the assigned fan according to the selected temperature source.
Conguration options: [CPU] [MB] [VRM] [PCH] [T_SENSOR1] [EXT_SENSOR1]
[EXT_SENSOR2] [EXT_SENSOR3]
If you select T_SENSOR1, plug a thermistor cable to T_SENSOR1 header and stick the
thermistor cable’s head to the desired component as the temperature source.
EXT Fan 1/3 Speed Low Limit [300 RPM]
This item allows you to disable or set the extension fans’ warning speeds.
Conguration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
EXT Fan 1/3 Profile [Standard]
This item allows you to set the appropriate performance level of the chassis fan.
[Standard] Set to make the chassis fan adjust automatically depending on the
chassis temperature.
[Silent] Set to minimize the fan speed for quiet chassis fan operation.
[Turbo] Set to achieve maximum chassis fan speed.
[Manual] Set to assign detailed fan speed control parameters.
The following items appear only when you set the EXT Fan Prole to [Manual].
EXT 1/3 Upper Temperature [70]
Use the <+> or <-> keys to adjust the upper limit of the EXT 1/3
temperature. The values range from 40°C to 90°C.
EXT Fan 1/3 Max. Duty Cycle(%) [100]
Use the <+> or <-> keys to adjust the maximum extension fan duty cycle.
The values may differ via Qfan tuning.

Table of Contents

Related product manuals