Asus X99-DELUXE II SERIES - Page 37

ASUS X99-DELUXE II Series BIOS Manual
37
CPU SVID Support
Disable this item to stop the CPU from communicating with the external voltage regulator.
Conguration options: [Auto] [Disabled] [Enabled]
CPU Input Voltage
This item allows you to congure the input voltage for the CPU by the external voltage
regulator.
Conguration options: [Auto] [0.800] - [2.700]
The following items appear only when you set the CPU SVID Support to [Enabled].
SVID Voltage Override
This item allows you to set a VCCIN for the CPU during initial part of POST. Use the
<+> or <-> key to adjust the value. The values range from 0.001 V to 2.440V at 0.001V
increment.
Conguration options: [Auto] [0.001] - [2.440]
DRAM SVID Support
Disable this item to stop the DRAM from communicating with the external voltage regulator.
Conguration options: [Auto] [Disabled] [Enabled]
DRAM Voltage(CHA, CHB)
This item allows you to congure the voltage for the DRAM on the left.
Conguration options: [Auto] [0.800] - [1.900]
According to Intel
®
CPU specications, DIMMs with voltage requirement over 1.65 V may
damage the CPU permanently. We recommend that you install the DIMMs with the voltage
requirement below 1.65 V.
DRAM Voltage(CHC, CHD)
This item allows you to congure the voltage for the DRAM on the right.
Conguration options: [Auto] [0.800] - [1.900]
According to Intel
®
CPU specications, DIMMs with voltage requirement over 1.65 V may
damage the CPU permanently. We recommend that you install the DIMMs with the voltage
requirement below 1.65 V.
PCH Core Voltage
This item allows you to congure the voltage for PCH(platform controller hub).
Conguration options: [Auto] [0.70000] - [1.80000]
PCH I/O Voltage
This item allows you to congure the I/O voltage for PCH(platform controller hub).
Conguration options: [Auto] [1.20000] - [2.20000]