Asus Z10PE-D8 WS - Page 112

4-42
Chapter 4: BIOS setup
USB Configuration
xHCI Mode [Auto]
Allows you to enable or disable the mode of operation of xHCI controller.
Congurationoptions:[Auto][Disabled][Enabled]
USB Ports Per-Port Disable Control [Disabled]
Allows you to control each of the USB ports 1 to 8 disabling.
Congurationoptions:[Disabled][Enabled]
The following items appears only when the USB Ports Per-Port Disable Control is set to
[Enabled].
USB Port #1/ #2/ #3/ #4/ #5/ #6/ #7/ #8 [Enabled]
Congurationoptions:[Disabled][Enabled]
USB 3.0 Port #1/ #2/ #3/ #4/ #5/ #6 [Enabled]
Congurationoptions:[Disabled][Enabled]
Azalia Configuration
Azalia [Auto]
Allows you to enable or disable the control detection of the Azalia device.
Congurationoptions:[Auto][Disabled][Enabled]