ASUS Z10PE-D8 WS 6-9
6. Insert the Red Hat
®
Enterprise RAID driver disk to the USB oppy disk drive, select
OK, then press <Enter>.
The drivers for the RAID card are installed to the system.
7. When asked if you will load additional RAID controller drivers, select No, then press
<Enter>.
More Driver Disks?
Yes No
Insert Driver Disk
OK
Back
8. Follow the onscreen instructions to nish the OS installation.
Insert your driver disk into /dev/sdb
and press “OK” to continue.
Do you wish to load any more
driver disks?
To Next Page
Loading...
