3-42
Chapter 3: BIOS Setup
Chapter 3
USB Type C Power Switch [Auto]
[Auto] The system will automatically detect your USB Type C devices and provide
suitable power if needed.
[Enabled] The USB Type C port will always provide power to your devices.
ASMedia Storage Controller (SATA6G_E12) [Enabled]
This item allows you to enable or disable the ASM1061 storage controller.
Conguration options: [Disabled] [Enabled]
The following items appear only when you set the ASM1061 Storage Controller to
[Enabled].
Windows Hot-plug Notification [Enabled]
This item allows you to enable or disable the Hot Plug notication in Windows
operating systems.
Conguration options: [Disabled] [Enabled]
ASPM Support [Enabled]
This item allows you to enable or disable the ASPM controller to save energy.
Conguration options: [Disabled] [Enabled]
Intel LAN Controller (LAN1-LAN2) [Enabled]
This item allows you to enable or disable the Intel LAN1/2 controllers.
Conguration options: [Disabled] [Enabled]
The following item appears only when you set the Intel LAN Controller to [Enabled].
Intel PXE OPROM (LAN1-LAN2) [Disabled]
This item allows you to enable or disable the PXE OptionRom of the Intel
®
LAN
controller.
Conguration options: [Enabled] [Disabled]
Bluetooth Controller [Enabled]
This item allows you to enable or disable the Bluetooth controller.
Conguration options: [Disabled] [Enabled]
Wi-Fi Controller [Enabled]
This item allows you to enable to disable the Wi-Fi controller.
Conguration options: [Disabled] [Enabled]
LED Design Switch [Auto]
[Auto] LEDs will only light up when the system is fully powered and operating.
[Enabled] LEDs will always light up at the S0(Working), S3(Sleep), and S5(Soft off)
states, but not light up at the S5 state when the “ErP Ready” is enabled.
[Disabled] LEDs will not light up.