Asus Z170-P - CPU Graphics Duty Control; CPU Graphics Phase Control; Internal CPU Power Management; Turbo Mode Parameters

CPU Graphics Duty Control [T.Probe]
TheGTpowerdutycontroladjuststhecurrentandthermalconditionsofeverycomponents
phase.
[T.Probe]SelecttomaintaintheVRMthermalbalance.
[Extreme]SelecttomaintainthecurrentVRMbalance.
CPU Graphics Phase Control [Auto]
ThisitemallowsyoutosetthepowerphasecontrolofGT.Congurationoptions:[Auto]
[Standard][Optimized][Extreme][PowerPhaseResponse]
DONOTremovethethermalmodulewhensettingthisitemto[Extreme] or [Power Phase
Response].Thethermalconditionsshouldbemonitored.
ThefollowingitemappearsonlywhenyousettheCPUPowerPhaseControlto[Power
Phase Response].
Power Phase Response [Fast]
ThisitemallowsyoutosetafasterphaseresponsefortheCPUtoincreasesystem
performanceortoslowerphaseresponsetodecreaseDRAMpowerefciency.
Congurationoptions:[UltraFast][Fast][Medium][Regular]
2.5.12 Internal CPU Power Management
ThesubitemsinthismenuallowyoutosettheCPUratioandtheirfeatures.
Intel(R) SpeedStep(tm) [Enabled]
Thisitemallowstheoperatingsystemtodynamicallyadjusttheprocessorvoltageandcores
frequency,resultingtoadecreasedaveragepowerconsumptionanddecreasedaverage
heatproduction.Congurationoptions:[Disabled][Enabled]
Turbo Mode [Enabled]
Thisitemallowsyoutoenableyourcoreprocessorsspeedtorunfasterthanthebase
operatingfrequencywhenitisbelowoperatingpower,currentandtemperaturespecication
limit.Congurationoptions:[Disabled][Enabled]
ThefollowingthreeitemsappearonlywhenyousettheTurboModeto[Enabled].
Turbo Mode Parameters
Long Duration Package Power Limit [Auto]
AllowsyoutolimittheTurboRatiostimedurationthatexceedstheTDP(Thermal
DesignPower)formaximumperformance.Usethe<+>or<->keystoadjustthevalue.
Thevaluesrangefrom1Wto4096W.
Package Power Time Window [Auto]
AlsoknownasPowerLimit1,thisitemallowsyoutomaintainthetimewindowfor
TurboRatiooverTDP(ThermalDesignPower).Usethe<+>or<->keystoadjustthe
value.Thevaluesrangefrom1to127inseconds.
2-24 Chapter 2: Getting started