Asus Z170-WS - Page 143

ASUS Z170-WS
4-3
Chapter 4
Method 2: Using a modified Windows
®
7 ISO
Load USB 3.0 drivers and install Windows
®
7 using a modied Windows
®
7 installation DVD.
Requirement:
• 1 x ASUS support DVD
• 1 x Windows
®
7 installation source
• 1 x Working system (PC or notebook)
• 1 x SATA ODD
1. On your working system, create an ISO image le of the Windows
®
7 installation
source using a third-party ISO software.
2. Copy both “Auto_Unattend.xml” and “Auto_Unattend” folder from the root directory of
the ASUS supporting DVD to your system.
3. Edit the ISO le and add both “Auto_Unattend.xml” and “Auto_Unattend” folder into the
ISO le.
4. Burn this ISO le onto an empty DVD to create a modied Windows
®
7 installation
DVD.
5. Insert the modied Windows
®
7 installation DVD into an ODD on your 100 series
platform.
6. Power on your system and press F8 during POST (Power-On Self Test) to enter the
boot screen.
7. Select the ODD as the boot device.
8. The USB 3.0 driver will be loaded automatically during installation startup.
The “Setup is starting...” screen will show up if the USB 3.0 driver is loaded correctly.
9. Follow the onscreen instructions to complete the Windows
®
7 installation.