Asus Z9PE-D8 WS - Onboard Devices Configuration

ASUS Z9PE-D8 WS 4-39
4.5.14 Onboard Devices Conguration
Serial Port 1 Conguration
Serial Port 2 Conguration
VIA 1394 Controller [Enabled]
Asmedia USB 3.0 Controller [Enabled]
Asmedia USB 3.0 Battery Charging S [Enabled]
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Set Parameters of serial
Port 1(COM1).
Serial Port1/2 Conguration
This item allows you to set parameters of serial ports 1 and 2.
Serial Port [Enabled]
This item allows you to enable or disable the Serial Port.
Conguration options: [Disabled] [Enabled]
Device Mode [Standard Serial Port Mode]
This item allows you to change the serial port mode.
Conguration options: [Standard Serial Port Mode]
VIA 1394 Controller [Enabled]
This item allows you to enable or disable VIA 1394.
Conguration options: [Disabled] [Enabled]
Asmedia USB 3.0 Controller [Enabled]
This item allows you to enable or disable Asmedia USB 3.0.
Conguration options: [Disabled] [Enabled]
Asmedia USB 3.0 Battery Charging S [Enabled]
This item allows you to enable or disable Asmedia USB 3.0 Battery Charging
S.
Conguration options: [Disabled] [Enabled]