19
①Dust and debris can accumulate on the fan blades over time, causing it to stop spinning. Check for
any physical obstructions that may be blocking the fan's movement and remove them. Please
connect the fan to different fan headers on the motherboard. If the fan still doesn’t work, please
replace the fan.
②Ensure that the cable is securely plugged into the motherboard.
2. Fan noise - Related components: Fan
①Over time, dust can accumulate on the fan blades, causing them to become unbalanced and
produce noise. Turn off your computer and carefully clean the fan blades using compressed air or a
soft brush to remove any dust or debris.
②Adjust the fan speed settings in the computer's BIOS or through software provided by the
motherboard manufacturer. Lowering the fan speed can help reduce the noise level. However, be
cautious not to set the fan speed too low, as it could lead to overheating.
3. FIO buttons and ports not working - Related components: FIO module
①Ensure that the cables connecting the FIO buttons and ports to the motherboard are properly
connected. Sometimes, these cables can come loose or get disconnected, leading to functionality
issues.
②Reconnecting the cables can resolve poor connections. Gently disconnect all the cables, wait for a
while, and then plug them back into the corresponding headers on the motherboard.
③If reconnecting the cables does not solve the issue, please replace the FIO module.
To Previous Page
Loading...