Operation Manual Touchscreen
Applies to all cabinets of the -24, -54 and -57
series with Touchscreen
(From LOGO software version upward of 1-24)
OPERATING THE DEVICE
All mechanical and electrical connections should be checked for tight fit and tightness prior to
commissioning, as well as to remove any soil.
Insert the plug into a grounded electrical outlet. If the device does not start instantly, it is in the
standby state. Please press the activation icon on the screen.
The initialization program of the cabinet now starts. When the initialization is complete, the display
shows the home screen and the fans start running.
To Next Page
Need help?
General