Safety instructions
- Make sure that the plug remains accessible after you have installed the
deep-frying pan.
- If the power cable is damaged, it should be replaced by an equivalent
cable (H05RNF 3 x 1mm
2
). The replacement cable is available from
the service department.
- The deep-frying pan is powered by 2200 W, requiring a 16 A fuse.
- The deep-frying pan should be earthed.
- There should be at least 5 cm of free space between the bottom
side of the deep-frying pan and the underlying surface of the
kitchen unit.
- Only use the appliance if it has been built in.
- Only switch on the appliance with the lid open if the reservoir has
been filled with frying fat. Switching on an empty deep-frying pan
will cause the element to overheat.
- Never switch on the heating element if it is in an upward position.
- Highly combustible objects near the element could catch fire.
- Be careful if there are children near the deep-frying pan.
- Always make sure that no cables can come into contact with hot
fat or the hot deep-frying pan.
GB7
SAFETY important matters
To Next Page
Loading...