Atag MX4211AUU - Setting the Clock; How to Set the Clock

12
When the appliance is rst plugged in, the DISPLAY lights up. After three sec-
onds, the Clock symbol and “12:00” blink on the DISPLAY.
Setting the Clock
Press CLOCK . The “12” starts
blinking.
Turn MULTI-FUNCTION SELECTOR
to set hour.
Press CLOCK again. The “00” starts
blinking.
Turn MULTI-FUNCTION SELECTOR
to set minute.
Press CLOCK again. The clock sets
by itself within 5 seconds.
1 2
3 4
5
Setting the Clock
MX4211AUU_A01-03208V_EN.indd 12 2009-12-25  1:01:36