Atag One - ATAG One Initial Setup Guide; Welcome and Prerequisites for Setup; Configuring ATAG One Wi-Fi Connection

Welcome to ATAG One, your thermostat.
Keep the Network security key or Wi-Fi code handy.
Do not give the code to third parties.
You must have your smart phone or tablet connected to
your wireless network.
1. Download One-app on your smart phone and/or tab-
let. Go to the Playstore/Appstore and search for: atag
one.
2. ATAG One thermostat.
 Atrststart:
Select your language and follow the steps until CON-
FIGURE and choose: YES*.
(When One is already connected: Go to SETTINGS
and select RECONFIGURE: YES).
(From SW/R43: Go to SETTINGS/CONFIGURATION/WIFI-
RECONFIGURATION)
*When choosing NO follow the steps for adjusting time and
date. The One will not be connected to the Wi-Fi network
andwillfunctionofineasaroomcontroller.
3. Start One-app.
Press Wi-Ficonguration.
CONFIGURE
Would you like to connect
your One app now?
Yes No
Remember me
E-mail address
Password Reset
Login
Register user
Wi-Ficonguration
Skip login
GB
Watch the instructions
video on Youtube.