EasyManua.ls Logo

AT&T 1070 - Remove All Entries from the Directory; To Save an Entry to a One-Touch Key

AT&T 1070
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
49
Directory
Remove all entries from the directory
1. Press [DIR] to begin working with the directory.
2. Press [ENTER] to select VIEW ENTRIES.
3. Press [ ] or [ ] until the screen shows END OF
LIST.
4. Press [REMOVE]. The screen display include
REMOVE ALL?
5. Press [REMOVE] again within three seconds to
confirm the command and remove all directory
entries. The screen will display ALL REMOVED!
NOTE: Once the entries are removed from the
directory, they cannot be restored.
To save an entry to a one-touch key
1. Find the entry for the desired number by
following the directions under Review
directory entries on page 46.
2. Press [ENTER] then [ ] or [ ] until you see
COPY TO 1-TOUCH.
3. Press [ENTER] to begin to save the number.
4. Press the one-touch button fo the location
where you want to save the number.
-OR-
Press [LOWER], then press the one-touch
button.
5. The screen automatically returns to the
directory record just reviewed.
6. Press [DIR] to exit.
NOTE: If the desired one-touch key location
was empty, the screen will display SAVED! If there
is a telephone number in it, the screen will display
REPLACE SPD#XX? (XX is the desired one-touch
location number.) You can replace the current
entry by pressing [ENTER], or keep the current
entry by pressing [ ] or [ ] until you see NO
REPLACE? Press [ENTER], then choose another
one-touch key location.
DIRECTORY
END OF LIST
DIRECTORY
REMOVE ALL?
DIRECTORY
ALL REMOVED !
Pat Williams
5550100
COPY TO 1-TOUCH
Pat Williams
5550100
PRESS 1-TOUCH
Pat Williams
5550100
SAVED! SPD#01

Table of Contents

Other manuals for AT&T 1070

Related product manuals