Remote Access Commands
Function: Command:
Play all messages in Press 1,then mailbox number (1 or 2).
a mailbox
Play new messages in Press 2,then mailbox number (1 or 2).
a mailbox
Repeat a message Press 4 while message is playing;each
press backs up another message.
Skip a message Press 6 while message is playing;each
press advances another message.
Stop Press 5.
Save messages Hang up.
Play messages in After “End of messages”and two beeps,
another mailbox press 1 (all) or 2 (new),then mailbox
number (1 or 2).
Delete selected message Press 3 while message is playing.
Delete all messages After “End of messages,”press 3,then
mailbox number (1 or 2).
Review announcement Press 7;system beeps twice,is ready
to accept a command.
Record announcement Press * 7;after beep,record
announcement,press 5 to stop. System
beeps twice,is ready to accept command.
Record memo Press #,then mailbox number where
you want memo recorded;speak after
beep;press 5 to exit.
Review settings Press 9;system announces current settings.
Change settings Press * 9.
ANSWERING SYSTEM OPERATION
AT CORDLESS HANDSET OR TOUCH TONE PHONE
35
To Next Page
Loading...
