ANSWERING SYSTEM OPERATION
AT CORDLESS HANDSET OR TOUCH TONE PHONE
36
Command:
Hang up,or if you are using the handset,
press a.
Press * 9,then press 9;system
announces current selection.Press 6 or
4 to hear other selections,press 9 to
save,press 5 to exit.
Press * 8;system announces day
setting,followed by,“To change, press 6
or 4. To change the hour, press 8.” Press
4 to move back a day,or 6 to move
forward a day.
Press 8;system announces hour setting,
followed by,“To change, press 6 or 4. To
change the minutes, press 8.” Press 4 to
decrease or 6 to increase hour.
Follow the same procedure to change
minutes setting. System announces new
time setting.
Press 0;system announces current status.
Press * 0;system announces,“The
machine is off.”
When system is off,it answers after 10
rings,announces “The machine is off”
and beeps twice. Press * 0;system
announces,“The machine is on.”
Press # when system answers after 10
rings;begin speaking after system beeps.
NOTE: The system beeps twice to indicate it is ready to accept a
command.
Remote Access Commands
Function:
End remote access call
Select an Outgoing
Announcement
Set the Clock
Review On/Off Status
Turn System Off
Turn System On
Record Message When
System is Off
To Next Page
Loading...
