Name: AT&T CL83215
Brand: AT&T
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Registration and deregistration

3. The IN USE light on the telephone base turns on. The handset

shows Registering... Please wait. When the registration is

successful, the handset shows HANDSET X Registered (HANDSET

represents the handset name, X represents the handset number)

and you hear a confirmation tone. The IN USE light turns off. The

handset is now registered with the telephone base.

If the registration fails, the system will automatically try to register

again. If registration fails aer the third try, Registration Failed

appears on both screens. The handset shows To register HS, see

manual and the telephone base returns to idle mode. This may

take up to ve minutes to occur. Please start again from Step 1.

NOTES:

You cannot register a handset if any other system handset is in use.

You can only register one handset to the telephone base at a time.

•

Adding and registering handsets

Other manuals for AT&T CL83215

Questions and Answers:

Need help?

Do you have a question about the AT&T CL83215 and is the answer not in the manual?

General