20
Telephone settings
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
To set the dial mode:
1. Press MENU/SELECT in idle mode to enter the
main menu.
2. Use qCID or pDIR to scroll to >Settings, then press
MENU/SELECT.
3. Use qCID or pDIR to scroll to >Dial mode, then press
MENU/SELECT.
4. Use qCID or pDIR to highlight >Touch-tone or >Pulse,
then press MENU/SELECT. The screen briefly displays
DIAL MODE is touch-tone or DIAL MODE is pulse.
There is a confirmation tone and the screen returns to
the previous menu.
Website
Use this feature to view the AT&T website address.
1. Press MENU/SELECT in idle mode to enter the main
menu.
2. Use qCID or pDIR to scroll to >Web address, then
press MENU/SELECT.
Handset settings
Home area code
>Dial mode
DIAL MODE
>Touch-tone
Settings
>Web address
www.telephones.
att.com
To Next Page
Loading...
