AT&T CRL32202 - Rename Handset; Key Tone

18
Telephone settings
Rename handset
You can create a handset name for each system handset.
1. When the handset is idle, press MENU/
SELECT.
2. Use qCID or pDIR to scroll to >Settings, then press
MENU/SELECT.
3. Use qCID or pDIR to scroll to >Rename handset, then
press MENU/SELECT.
4
. Change the handset name when prompted.
Press
qCID or pDIR to move the cursor to the left
or right.
Use the dialing keys to enter a name (up to 11
characters). Each time you press a key, a character
on that key appears. Additional key presses produce
other characters on that key. See the chart on
page 33.
Press
MUTE/DELETE to backspace and delete a character.
Press and hold
MUTE/DELETE to delete all characters.
5. Press
MENU/SELECT to save the setting and return to the previous menu.
There is a confirmation tone.
�ey tone
The handset is preset to beep with each key press. You
can adjust the key tone volume or turn it off. If you turn
off the key tone, there are no beeps when you press keys.
Press MENU/
SELECT in idle mode.
Use
DIR or CID to scroll to >Settings, then press
MENU/SELECT.
Use
DIR or CID to scroll to >�ey tone, then press
MENU/SELECT.
Use
DIR or CID to sample each volume level.
Press
MENU/SELECT to save your preference. There
is a confirmation tone and the screen returns to the
previous menu.
•
•
•
•
1.
2.
3.
4.
5.
Handset settings
Clr voicemail
>Rename handset
RENAME HANDSET
HANDSET____
Rename handset
>Key tone
KEY TONE
Off