29
Multiple handset use
Use the intercom feature for conversations between two handsets. This
feature is only available if you have at least two system handsets. Intercom
is not available for the CRL32102 model. You can buy accessory handsets
(AT&T model CRL30102) to expand your system.
Use a handset to initiate intercom calls and transfer calls.
1. Press MENU/
SELECT in idle mode to enter the main menu. Press qCID or
pDIR to scroll to >Intercom, then press MENU/SELECT. Choose from the
following options.
If you have a two-handset system, your handset
screen shows Calling other handset.
If you have more than two handsets, your screen
shows INTERCOM TO:
Use the dialing keys to eenter
a specific handset number (1-9 for handsets 1-9,
TONE
followed by 0-2 for handsets 10-12, or
TONE followed by # for all handsets), or press
qCID or pDIR to scroll to the desired handset and
press
MENU/SELECT. Your handset screen shows
Calling HANDSET X or Calling all handsets.
The other handset(s) rings and shows Other handset
is calling, HANDSET X is calling all or HANDSET X is
calling (X represents the handset number).
2. To answer the intercom call, press PHONE/FLASH,
/SPEA�ERSPEA�ER or any dialing key (0-9, TONE , or #) on
any called handset. Both handsets now show Intercom.
3. To end the intercom call, one party presses OFF/
CANCEL, or places the handset back in the telephone base or charger. The
other party hears four beeps. Both handsets display Intercom ended.
NOTES:
Before the intercom call is answered, you can cancel it by pressing
OFF/CANCEL.
If the called handset is not answered within 100 seconds, or if it is in the directory or caller ID
log, or is on a call, or is out of range, the calling handset shows No answer. Try again.
Pressing
OFF/CANCEL or MUTE/DELETE temporarily silences the intercom ringer.
You can only use one pair of handsets to make intercom calls at a time.
•
•
•
•
•
•
Intercom
Calling
HANDSET 1
HANDSET 2
is calling
Intercom
10/20
10:30
PM
To Next Page
Loading...
