62
Appendix
Handset alert tones
1 short beep Tone of each key press, if key tone is turned on.
1 long beep Indication to begin recording a message, memo or announcement.
2 short beeps
You are pressing qCID or pDIR on a cordless handset when the
volume is already at its highest or lowest setting.
-OR-
Call waiting tone.
-OR-
Error tone.
Confirmation tone
(3 rising tones)
The system has completed the command successfully.
4 beeps The other party has ended your intercom call.
-OR-
The handset has gone out of range from the base during a call.
4 short beeps Low battery warning.
Telephone base tones
Beeps every 10 seconds Message alert.
Fast ringer tone
You are setting the ringer volume by pressing the q/VOL/p keys
on the telephone base.
Long beep Indicates the start of message recording during call screening or
the end of a message playback session.
4 short beeps Registration failure tone.
Screen icons, indicator lights and alert tones
To Next Page
Loading...
