Add and register handsets
If registration fails, the system will automatically try to register
again. If registration fails aer the third try, Registration failed
appears on the handset screen. The handset shows To register,
see user manual and the telephone base returns to idle mode.
This may take up to ve minutes to occur. Please start again from
Step 1.
Notes:
f You cannot register a handset if any other system handset is in use.
f If you try to register more than five handsets to the telephone base, the telephone base shows
Registration slots are full and sounds two beeps.
Registration and deregistration
11
If it is the rst time you install your AT&T
DL72119/DL72219/DL72319/DL72419 telephone
system, or power returns following a power
outage, the handset will prompt you to set the
date and time when registration is successful.
Aer that, it will prompt if you want to set up
Smart call blocker* and the answering system via
voice guides. Press MENU/SELECT
on the handset
to start. For details, see the corresponding
sections in the telephone system’s user’s manual.
To skip these settings, press OFF/CANCEL on
the handset.
* Includes licenced Qaltel
TM
technology.
Qaltel
TM
is a trademark of Truecall Group Limited.
Voice guide set
ECO
Smart call blk?
ECO