81
Smart call blocker
Call block settings
7. Press MENU/SELECT to store your block entry.
Notes:
f Numbers saved in your directory can also be saved to the block list.
f If you save a block entry that has already been saved to the allow list, the entry in the allow list will be removed.
Review block list:
1. Press VOICE/CALL BLOCK when it is not in use.
-OR-
Press MENU/SELECT to enter the main menu when it is not in use. Press CID
or DIR to scroll to Smart call blk, then press MENU/SELECT.
2. Press CID or DIR to scroll to Block list, and then press MENU/SELECT.
3. Press MENU/SELECT to choose Review.
4. Press CID or DIR to browse through the block entries.
Note: List empty appears if there are no block entries.
Save a caller ID log entry to block list:
1. Search for the desired caller ID log entry (see Review the caller ID log on
page 67).
2. When the desired entry displays, press MENU/SELECT.
3. Press CID or DIR to scroll to To Block list, then press MENU/SELECT.
4. The handset displays Enter number. Use the dialing keys to edit the number,
when necessary.
f Press CID or DIRtomovethecursortotheleorright.
f Press MUTE/DELETE on the handset to backspace and erase a digit.
f Press and hold MUTE/DELETE to erase the entire entry.
f Press and hold REDIAL/PAUSE to insert a three-second dialing pause (a P
appears).
5. Press MENU/SELECT to move to the name. The screen displays Enter name.
To Next Page
Loading...
