To Direct Unannounced Calls with a DSS
With Automatic Completion:
1. Look at the light next to the DSS button where you want to direct
the call.
• If the light is on, the co-worker is either on a call or is using the
Do Not Disturb feature. You may want to take a message.
• If the light is off, go to step 2.
2. Press DSS button.
The call is directed automatically. You are available for the next call.
With Manual Completion:
1. Look at the light next to the DSS button where you want to direct
the call.
• If the light is on, the co-worker is either on a call or is using the
Do Not Disturb feature. You may want to take a message.
• If the light is off, go to step 2.
2. Press DSS button.
3. Press
Release
.
The call is directed.
To Direct Unannounced Calls without a DSS
1. Press
Start
.
The caller is put on hold and you hear a dial tone on your call button. The
Source button shows fast flashing green light.
2. Dial extension or outside number.
You may need to enter the dial-out code or pool access code before
dialing the outside number.
3. Hang up, press
Release
, or use the headset.
The call is directed.
2-12
To Next Page
Loading...
