AT&T PC 6300 - Page 153

n
n
n
n
■n
n
•ft
INSTALLATIONS
n
n
rt
7. Insert the tab on the Small Expansion Box into the slot on
the left front of the System Module (Figure 3-36). Make
sure that the signal cables are placed into the System
Module so they are not pinched.
Figure 3-36. Fitting a Small Expansion Box to the
System Module
8. Fasten the Small Expansion Box to the System Module by
attaching the clamp to the rear of the System Module
(Figure 3-37).
n
3-65
n
n
n
n