AT&T PC 6300 - Page 294

DIAGNOSTICS P
L -
■ n
A>9yatem<CR>
4-88
n
5. Insert the System Test Diskette into MFD Unit A and close
the drive door. m
u
6. Load the System Test Diagnostics (Overlay Version) by
entering:
n
7. When the diagnostics have been loaded, MENU A will _
appear on the screen. I ,1
The overlay version of the System Test is not placed in sa
memory as in the-standard version. Various tests and j |
subtests are accessed directly from the diskette program as
needed. ^
. . • 0
8. If the system is looking for the program or the diskette is
not in the proper drive, the following display appears:
n
-> SYSTEM TEST DISKETTE MUST BE IN DRIVE <X}
MAKE SURE DISKETTE IS INSTALLED I ^
PRESS ANY KEY
n
Note: Do not rename this program because it will ^
not run under any name other than "System." p
n
0
n
n
n
n