Synapse Installation Guide Back to Contents
Getting Started 57
T1 Gateway Features
Figure 30 illustrates the T1 Gateway features and connections.
Figure 30. T1 Gateway Features and Connections
1. Display Provides system and network status, device information, and
configuration data. See “Gateway Front Panel Interface” on
page 61.
2. Reset Restarts the Gateway when pressed momentarily.
Restores factory defaults when pressed and held for more than
five seconds with the LAN cable not connected.
3. T1 Port
4. RJ-45 Ethernet Network Port 10Base-T/100Base-Tx with Auto MDI/MDI-X switching.
5. DC 12V Power-Supply Jack
To Next Page
Loading...
