Programmable Features
To erase the 24-button programmable features:
ACTION
1.
2.
3.
4.
5.
Press the INTERCOM button.
Lift the receiver or press the
SPEAKER button.
Dial “ ★ ” and “0” (zero).
Press memory.
Press the button (26 or 27) with the
feature you wish to erase.
OUTCOME
You will hear a dial tone and the
intercom light will go on.
You will get a confirmation tone.
Now when you press that button
nothing will happen. The feature you
had programmed in is no longer
active.
NOW YOU TRY IT . . .
Take either of the features you just programmed on buttons 26 and 27
and erase it. Follow STEPS 1 through 5 above, and then test it by
pressing the button from which you erased the programmed feature.
35
To Next Page
Loading...
