16
Headset attachments
Over the head band
There are two over the head bands provided. Choose the one
that best fits your need to attach to the headset. Follow the steps
below to attach an over the head band to the headset.
To attach the head band to the headset:
Make sure there is no headset attachment, except the earbud,
connected to the headset.
Insert the earpiece into the loop of the ear pad, as shown in
Figure 6.
Push the earpiece into the ear pad until it clicks into place, as
shown in Figure 7.
Adjust the head band to fit your head. Adjust and rotate the
angle of the headset until the microphone is pointing towards
your mouth, as shown in Figure 8.
1.
2.
3.
4.
Figure 8
Figure 6
Figure 7
To Next Page
Loading...
