27
By default, the ear pad on the neck band is positioned to be
worn on the right ear.
To attach the headset to the neck band:
Make sure there is no headset attachment, except the earbud,
connected to the headset.
Insert the earpiece into the loop of the ear pad, as shown in
Figure 9.
Gently press the earpiece inward until it clicks into place, as
shown in Figure 10.
Place the neck band around your neck and over your ears.
Adjust and rotate the angle of the headset until the microphone is
pointing towards your mouth, as shown in Figure 11.
1.
2.
3.
4.
5.
Headset attachments
Behind the neck band
Figure 10Figure 9
Figure 11
To Next Page
Loading...
