AT&T UNIX - Delete Command

Using Office Commands
4 Point to [OK] and press <Bl>, or press
<Enter>.
If the object you created is an application file, an
application window usually opens, ready for you to
begin work on the new file. See your application
manual for details.
If you have created a folder, the new folder is placed
in the folder that was current when you started the
Create command or in the Filecabinet if the Office was
current.
pelete Command
The Delete command removes folders or files you no
longer need from your Filecabinet or Floppydisk. This
makes more room in your Filecabinet for folders and
files you need to keep.
All deleted folders and files are moved to the
Wastebasket, so you have a chance to retrieve any
accidental deletions before they are deleted from the
system.
You can use either of these methods to enter the Delete
command:
o Press <Dlete>.
o Select IDeletel from the Commands menu.
For more information on the various methods of entering
commands, see "Selecting Objects and Entering Commands"
in this section.
To delete a folder or file:
1 Open or resume the folder containing the
folder or file you want to delete.
2 Point to the folder or file you want to
delete.
3 Press <Dlete> or select IDeletel from the
Commands menu.
The folder or file is moved to the Wastebasket.
3-63