AT&T UNIX - Copying or Moving Folders and Files to a Floppydisk

Using Floppy Disks
9 Type y if you want to make another copy;
type n if you do not want to make another
copy.
10 Remove the target diskette from the floppy
disk drive.
If you chose to make another copy, respond to the next
message by inserting a formatted target floppy disk and
pressing the Enter key or the B1 mouse button.
If you chose not to make another copy, the floppy disk
copy procedure is completed.
Copying or MoYing Folders and Files to a Floppy Disk
You can copy or move selected folders and files to a
UNIX
PC floppy disk. You may want to do this for
safekeeping or for security reasons.
For information on how to handle floppy disks and
insert them into the drive, see "Handling Floppy Disks"
at the beginning of this chapter.
To copy or move folders or files onto a floppy disk:
1 Open or resume the Filecabinet or the folder
that contains the folders or files you want
to copy or move.
2 Select the folders or files you want to copy
or move.
3 Select the ,Copy or Move command.
The message Open destination folder and touch
PASTE appears. The Floppydisk is the
destination.
4 Resume the Office window.
5 Point to I Floppydiskl and press <Enter> or
<B1>.
You see the Floppydisk menu.
3-117