AT&T UNIX - Canceling Printer Jobs

Using Printers
If no print jobs are printing or waiting to
be printed, the Printer queue status window
is empty.
6 When you finish viewing the display, press
<Exit>.
Canceling Print Jobs
You can use the Printer queue status display to cancel
any job that is waiting to print.
To cancel print jobs:
1 Point to \ Printers \ from the Office and press
<Enter>.
2 Point to \Printer Queue \ and press <Enter>.
3 Point to the print job you want to cancel.
If you want to cancel several print jobs,
point to each and press <B3> or <Mark>.
4 Press <Enter> or <Bl>.
A confirm message is displayed.
5 Press <Enter> or <Bl>.
The item(s) are removed from the queue, and the printer
stops printing in a few moments.
Note
If you cancel a graphics print job (for
example, a screen print) in the middle
of printing, you must reset the printer
to exit graphic print mode. To do this,
turn the printer's power switch off and
then on again.
3-133