AT&T UNIX - Page 334

Maintaining the UNIX PC
4-98
9 If you select any choice other than RESTORE
All perform the appropriate procedure below:
o RESTORE by UNIX Name
Type the complete UNIX pathname of the
files you want to restore. Type one file
name in each field, pressing <Return> to
move to the next field.
When you have entered all your file names
or you have filled the screen, press
<Enter>.
o SHOW and RESTORE Folders
Point to the desired folder and press
<Enter>.
For more than one folder, point to the
first folder and press <Mark>; point to
the next folder and press <Mark>. When
you have marked all the folders to be
restored, press <Enter>.
o SHOW and RESTORE Files
Point to the desired file and press
<Enter>.
For more than one file, point to the file
and press <Mark>; point to the next file
and press <Mark>. When you have marked
all the files to be restored, press
<Enter>.
When the restore procedure is complete, a
message informs you that it is safe to remove
the floppy disk.
10 Remove the floppy disk and insert the next
one, if any.
11 Press <Enter>.
12 Continue with the above procedure until you
have restored your files.