6.0 UART Control (RS-232)
The ATC-1000 support three serial types: RS232, RS422 and RS485, The
user can reference hardware diagram to directly select RS232, RS422,
RS485, no need select by software.
Baud Rate: default 57600, range 300bps to 230.4Kbps
Character Bits: 5, 6, 7, 8 (default)
Parity Check: None (default), even, odd, space, mark
Stop Bits: 1 (default), 1.5 or 2
Hardware Flow Control: None (default), CTS/RTS (or Hardware)
ATC-1000 Management Setup
This chapter will show you how to manage ATC-2000’s access
setting as well as configure E-mail alert and firmware upgrade.
Hi-speed UART the relevant setting, it is basically similar as windows
Shenzhen ATC Technology Co., Ltd
Room 803, Block B, Building 4, Tian'an Cyber Park, Longgang District,
Shenzhen,China,518172
Tel: +86-755-8345 2531
Fax: +86-755-2899 8985
E-mail: tech@szatc.com
Web-Site: www.szatc.com
To Previous Page
Loading...