2.5 Specifications
MAIN OUTPUTS
Maximum Output Level 8.5V RMS into 600 Ohms balanced
17.5V RMS into 600 Ohms unbalanced
Input Sensitivity (for 1V Output) 230mV
Input Impedance Phono (Unbalanced) 20k Ohms
XLR (Balanced) 2k7 Ohms per leg
Output Impedance 10 Ohms
Frequency Response (-3dB) DC - 500kHz
Total Harmonic Distortion 0.0005% (-106dB) @ 1V into 600 Ohms
Crosstalk (10Hz – 20kHz)
>
90dB
S+N/N Ratio: >95dB (Wide band)
>104dB (DIN)
>108dB (IEC "A")
Residual noise
>
116dB (IEC "A")
Absolute phase Phono (Unbalanced) Zero Degress
XLR (Balanced) Zero Degrees, Pin 2 Hot
XLR CMRR (100Hz – 10kHz)
>90dB
Power Requirements 100V, 120, 220, 230V 50/60Hz
Power Consumption 35VA maximum
Dimensions (including terminals) H100 x W440 x D360mm
H3.9 x W17.3 x D14.2 inches
Weight 9.5kg (20.9lb) Net
11.0kg (24.2lb) Packed
SCA2
Preamplifier
E. & O.E. The policy of Loudspeaker Technology Ltd. is that of continuous design and development. We reserve the right to change
specifications without prior notice.
To Next Page
Loading...
