ATC CA2 - 4.5 SIA2-150 Integrated Amplifier Performance Data

17
SIA2-150
Specifications
4.5 Specifications
Power Output >150 Watts
(1% Distortion, 1kHz, Both
channels driven, Continuous average)
Frequency Response <2Hz – >400kHz
(
-3dB)
Distortion <0.002% (-95dB)
(1kHz, 8 Ohms, 1dB below full power)
Input Sensitivity 350mV
(150 Watts, 8 Ohms, 1kHz)
Input Impedance 20k Ohms
S+N/N Ratio >100dB (Wideband)
Crosstalk >90dB
(10Hz – 20kHz)
Absolute Phase Zero Degrees (Phono)
Power Requirements 100, 115, 230V factory set, 50/60Hz
Power Consumption 10VA Standby
500VA Maximum
Dimensions (H x W x D)
135 x 435 x
350mm
(Including terminals)
5.31 x 17.1 x 13.8 inches
Weight
20kg/44lbs Net
22.2kg/48.8lbs Packed
E. & O.E. The policy of Loudspeaker Technology Ltd. is that of continuous design and development. We reserve the right to change
specifications without prior notice.